It is completely different to utilize a stand-up forklift compared to a sit-down model. The way you move and lift cargo along with your movements are completely different. If you do not have proper training for utilizing a stand-up unit, you can potentially cause harm to yourself or to co-employees. When operating a stand-up model, you need to follow the proper safety rules. There are several basic operating standards which should be met when using a stand-up model.
When starting, stand up on the lift truck so as to get a feel for the steering knob and the controls. The steering is handled utilizing the knob steering plate as opposed to a steering wheel. Remember that this particular knob moves really fast, hence, you should be accustomed to moving it gently so as to be certain not to over steer. The horn is situated on the control handle, like with the control for forwards, backwards and the movement of the forks. The floor pedal allows the equipment to move.
Turn the key to start the equipment's engine if you are ready to start. The forks should not be extended at this stage. When you are moving all-over the floor, the forks must be pointed a little upwards. Never drive with extended forks. If you are moving forward, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn in order to warn those around you. Look behind you before stepping on the pedal so as to make sure the way is safe and clear. Then, while stepping on the pedal, pull the control handle towards you. Always stay alert and focused and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
The stand-up units take some getting used to, especially if you have just used sit down units. With some training and taking some time to figure out the machinery, you can quickly and efficiently handle loads in little time.