Used Cushion Tire Forklift Santa Maria - Forklift trucks are commonly classified by the kind of work they complete as well as the kind of tire they use. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These types of forklift tires are easier to maintain and less expensive to manufacture. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires also allow the forklift to sit closer to the ground. The advantage of a lower forklift is the increased vertical clearance when compared to forklifts with pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
There are many jobs suitable for cushion tire forklifts such as unloading shipments, transporting items to and from the loading areas, order picking, unloading inventory and more.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. Locations that have sharp debris or objects that could puncture a standard air pneumatic tires such as junkyards or lumber yards will benefit from solid resilient pneumatic forklift tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The forklift designed for use with cushion tires, is intended to be used mostly indoors, with some limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Work which requires forklift operations in tight areas, such as narrow aisles, are ideal for the use of a cushion tire forklift.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Again, because most cushion tire forklifts are powered by electricity, rather than an internal combustion engine, cushion tire forklifts produce no harmful emissions.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. Axles and tires are specific to a forklift frame and lifting capacity. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution is to outfit traction tires on the front of the cushion tire forklift. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
The smaller turning radius on the cushion tire forklifts is one of their main advantages. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Warehouses that utilize a narrow aisle layout will especially benefit from the smaller turning radius of cushion tire forklifts. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air pneumatic tires work great outside on gravel and asphalt applications. The main issue with air pneumatic tires is their ability to become gouged or punctured. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. Due to this, numerous air pneumatic forklift users fill foam in their tires. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Flat tires can be filled with foam to keep them more durable and prevent flats. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Some electric powered cushion tire forklifts do have lift limits. Pneumatic tire and cushion tire forklifts are available in practically any load capacity. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
